|
Schedule notes
Written assignment Practice quiz Chapter 3 |
Supplementary materials
Further reading Computer resources Bottom of page; return links and contact information |
|
|
Schedule notes. We will start Ch 3 (Sect 1-4) in class 2 (2/9), focusing on Sect 3-4 at first. We will "finish" it in class 3 (2/16). (We cover only parts of this Ch for now; see below.)
WRITTEN ASSIGNMENT #1, due in class 4 (2/23).
I will return the homework on 3/2 (test night). If you would like it back sooner, include a SASE when you turn in the homework. If you miss class on 2/23, I encourage you to mail me the homework, so I can get it back to you on test night. (My mail address is on the General Information handout [in the paper version you received; not posted at web site].) This is most important if dimensional analysis is new or unclear to you. The main purpose of the assignment is pre-test feedback on dimensional analysis. A practice quiz for Ch 3 is at the web site. [See Practice quizzes page.] |
Ch 3 is a long chapter, with a general theme of problem solving. It introduces some math tools, a problem solving strategy, and some specific applications. The single most important part of this chapter is the use of dimensional analysis as a problem solving tool. Ch 3 also introduces the metric system.
Sect 3.2. This is useful math, but we will spend little class time on it. If it is new to you, give it a try. I'll be happy to help people with this privately.
If you want some help with your scientific calculator, see my web page on the topic: scientific calculator page. It provides information about some models. I will soon ask each of you to fill out such a form for your calculator. Of course, you can also see me for calculator help.
Calculator "tests". Using your scientific calculator...
1) Multiply 2.4x1034 * 4.6x10-19. You should get 1.104x1016.
2) Multiply 2x1014 * 1012. You should get 2x1026.
If you do not get these answers, or otherwise need help using your calculator with exponential notation, please see me.
Students ask... how do you know when to use exponential notation or ordinary decimal form? There is no right or wrong here; they are two ways to express the same number. Exponential notation is generally most appropriate for numbers with many zeroes at one end (large positive or large negative exponent). Sometimes, it's just a matter of consistency: if most numbers in a set are in one form, it may be most appropriate for your next number to be in that form. Exponential form may allow you to more clearly indicate the number of significant figures (Sect 3.5).
Sect 3.3. This is the heart of the chapter. Dimensional analysis is a tool, a logical approach. Dimensional analysis helps guide you through problems, even if you are not quite sure what to do. It is important that you learn this tool, and that you show clear work in dimensional analysis problems. Practice!
The goal for class 2 (2/9) is to get started with dimensional analysis; we will continue it next time, and will use the method throughout the course. I think it will be very helpful if you have read this and tried a few of the Examples yourself. Class will make more sense to you -- and you will know whether you find this an easy or hard topic.
For more help and practice with dimensional analysis, including multi-step problems, see the supplementary handout on this topic. (See the Supplementary materials section, below.)
Dimensional analysis is also called unit analysis or the factor-label method. There is an argument that unit analysis is a better name than dimensional analysis; technically, we analyze units (such as inches or meters), not dimensions (the property, such as length). I don't really care what the name is; what is important is using it as a problem-solving tool.
Sect 3.4. You should become comfortable with the basic units, and with the major metric prefixes used in chemistry (highlighted in Table 3.2: kilo-, centi-, milli-). We will tend to cover this material piecemeal as needed; it's a good section to refer to often.
(Modern analytical chemistry and biotechnology are becoming increasingly sensitive. As a result, the units for smaller amounts are becoming more important to many. A complete list of metric prefixes, from yotta to yocto -- with some fun examples of their use, is at the web site.)
You should be able to do metric conversions by dimensional analysis.
Sect 3.5. Significant figures (SF). This is an important idea; try to see how SF relates to measurement uncertainties. Fig 3.5 is nice. However, it is easy to get bogged down with all the specific rules, especially when zeroes are involved. We will cover it mostly by example as we go along. To some extent it is almost "common sense" that if you multiply or divide three digit numbers, you should express your answer with three SF. As you go through the course, try to be "reasonable" with SF; learn from the feedback.
Sect 3.6. I do not expect you to know metric-USCS conversion factors. However, given the conversion factors, these conversion problems are simply another straightforward application of dimensional analysis.
Sect 3.7. Temperature (T). Most lab work is done with the Celsius T scale. The Kelvin scale is important theoretically (e.g., gas laws, Ch 4 & 13). You are not responsible for the Fahrenheit scale.
Be careful to distinguish T and DELTA T in doing problems. T is temperature, on a specific scale. DELTA T is a temperature change (the DELTA [symbol shown in paper version], a Greek capital delta, means "change in"; p 34 margin note); only the size of the degree unit matters. For example, to interconvert C and K T values, you must take into account that the scales are offset by 273. T in deg C = T in K - 273. But to interconvert C and K DELTA T values, all that matters is that the degree size is the same. DELTA T in deg C = DELTA T in K; the 273 offset disappears in subtracting to find DELTA T. To convince yourself, try an example.
Sect 3.8. Density is a useful idea; it is a good example of an intensive property -- one that does not depend on how much material you have. The density equation (3.9) is fairly simple. However, I would emphasize using dimensional analysis in doing density problems. Even if you use the equation, be sure to check that the units work out right (p 79).
Sect 3.10. Judging from the title, this sounds important!
I have posted two supplementary self-help worksheets relevant to Ch 3 at the web site, on the Chemistry problems page. They are on Dimensional Analysis and Density. Each of these -- and others posted there -- offers a brief presentation of key points, but mainly consists of extensive sets of practice problems. (I will hand out the Dimensional Analysis worksheet, so you can get a sense of what these are like. But for the others, I will simply mention them in the handouts, and you can check them out at the website as you wish.)
F B Salisbury, Standardizing with SI units. BioScience 48:827, 10/98. An extensive discussion of how to use units, aimed at biologists. You may find more here than you want to know, but it can also be delightful reading.
Book. A Linklater, Measuring America -- How an untamed wilderness shaped the United States and fulfilled the promise of democracy. Walker, 2002. ISBN 0-8027-1396-3. In Berkeley Public Library. A book about why the US should have but did not adopt the metric system from the start. A book about the history of measurements, and of units. A book about surveying -- and about Thomas Jefferson. A book that is surprisingly much more interesting than the short title might suggest, in part because it is well written and in part because it brings together a range of seemingly unrelated topics in an unusual but fascinating way (as the subtitle may hint). This is listed on my web page Books: Suggestions for general reading.
D L Hu and J W M Bush, Meniscus-climbing insects. Nature 437:733, 9/29/05. If you thought walking on water was difficult, just wait until you try to climb the meniscus. Small animals, such as some insects, are supported on water by surface tension. However, the meniscus must seem like a "frictionless mountain" to them. Some apparently jump over the meniscus. But some have special wettable appendages, and make use of capillarity to travel on the meniscus.
An excellent presentation of unit conversions:
http://oakroadsystems.com/math/convert.htm
On this page, Stan Brown emphasizes the importance of "a
well-chosen form of 1". He includes many examples, of increasing
complexity, and a few practice problems.
For links to some optional lab activities that you can do on your own, see my X11 Internet Resources page. Some of these relate to this Ch.
Have you wondered about the stories -- real or imagined -- behind the names of the units? Read the story of Claude Emile Jean-Baptiste Litre (1716-1778) -- and his daughter Millie: http://www.student.math.uwaterloo.ca/~stat231/stat231_01_02/w02/section3/fi1.2.pdf.
The kilogram is the only unit that is still defined by a specific
physical object, in this case a bar stored in Paris and declared to be
the official kilogram. Physicists would love to develop a definition of
the kilogram that is more fundamental, but it is proving to be a
difficult task. One possibility is to declare a value for Avogadro's
number (Ch 7); that would fix the magnitude of the mass unit. The
following two items are both on this story; they are both from the same
people. A major thrust of the argument here is that we should go ahead
and make the change, even though not all the underlying questions have
been answered yet. #1 is perhaps more readable for the general
audience, whereas #2 has more depth. #1 refers to #2.
* 1. New, 1/18/06.
I Mills, An update on the kilogram. Chemistry International [online news magazine of the
International Union of Pure and Applied Chemistry (IUPAC)] Vol 27 #5. 9/05. http://www.iupac.org/publications/ci/2005/2705/3_mills.html.
* 2. New, 8/10/05.
I M Mills et al, Redefinition of the kilogram: a decision whose time has come. Metrologia 42:71-80, 4/05. Free online at http://www.iop.org/EJ/toc/0026-1394/42/2; scroll down to the article on p 71.
Feature section: Fundamentals of Measurement. Science 306:1307 ff, 11/19/04. A set of articles dealing with some fairly advanced issues in establishing standards for measurement. Despite the level, some may find it worth a browse for the general ideas and some bits of history. The issue is freely available online. Link to introductory article of this feature section, with list of articles: http://www.sciencemag.org/cgi/content/summary/306/5700/1307.
As mentioned above, I have also posted a complete set of metric prefixes, with examples. I also mentioned the practice quiz, scientific calculator page, and supplementary worksheets.
Go to Top of page Intro Chem (X11) "Chapter handouts" Intro Chem (X11) syllabus Intro Chem (X11) home page Site home page
Last update: August 21, 2006.
